Fibre Microscope
  • £1,775.94
    LEAD TIME REQUIRED
    The FBP-P5000i microscope probe plugs into a
    More...

    The FBP-P5000i microscope probe plugs into a laptop computer (not supplied) via USB port and includes FiberChekPRO software for the display and automatic analysis of fibre optic connector polish quality

    By automating the evaluation of the connector the FiberChekPRO software removes human subjectivity and provides consistency in fibre inspection

    This allows the implementation of standardized procedures for inspection throughout networks

    The software provides a simple pass/fail result based upon the selected criteria. Programs are provided for singlemode and multimode connectors and can be user defined to produce in house standards

    The software can also inspect to IEC 61300-3-35 allowing contractors to demonstrate compliance to an internationally recognised standard

    The results and images can be archived as an HTML or PDF file

    Supplied in a case complete with 2.5mm (e.g. ST, FC & SC) & 1.25mm (e.g. LC & MU) patch cord tips plus LC and SC patch panel bulkhead tips

    The FBP-P5000i is also compatible with a number of JDSU OTDR and service test platforms giving a true inspect before you connect and test, field-portable workstation. These instruments also support the automated pass/fail analysis

    The FBP-P5000i can be used with the MTS-2000, MTS-4000 and MTS-6000A OTDR platforms and the MTS-5800 and HST-3000 service testers

    It can also be used with the HD4i handheld display

    A cleaning and inspection kit is available comprising a case, FBP-P5000i probe, FiberChekPRO software, FC, SC, LC ST adaptor tips, 1.25mm & 2.5mm patch cord tips, Cletop-S patch cord cleaning cassette, and FerruleMate 1.25mm & 2.5mm in-adaptor cleaners

    View details
  • £57.35
    LEAD TIME REQUIRED
    The FBPT series tips allow JDSU microscope probes
    More...

    The FBPT series tips allow JDSU microscope probes to inspect a very wide range of patch cord connectors and patch panel bulkheads

    Compatible with the FBP-P5000i probe and the FBP-P5 probe (used with HD1,2,3 & HP3 series displays)

    Only a small selection of tips are shown. If you cannot find a tip for the connector that you are using then please contact our sales department. The chances are we have what you are looking for

    We can also supply special tips for connectors that are difficult to access e.g. 60 degree angle and long reach

    View details
  • £203.49
    LEAD TIME REQUIRED
    A low cost microscope for fibre optic patch cord
    More...

    A low cost microscope for fibre optic patch cord connector end face inspection

    Coaxial illumination provides the most critical and detailed view of the fibre end face to highlight scratches and contamination

    Available with 200x or 400x magnification. 400x recommended for singlemode connector inspection

    FM-C99 can be switched between 200x and 400x magnification

    Includes an adaptor to allow inspection of 2.5mm connector ferrules (e.g. ST, FC/PC, SC/PC)

    Adaptors are available for all common connector styles and many less common types (e.g. military)

    Powered by 3 AAA batteries (included). Includes soft carry case and 2.5mm ferrule adaptor

    View details
  • £1,398.55
    LEAD TIME REQUIRED
    Microscope probe kit that allows for the
    More...

    Microscope probe kit that allows for the inspection of fibre optic pigtails mounted in patch panels without having to disassemble the panel

    Can also be used to inspect patch cords

    The probe is wired to a handy pocket sized display. The 1.8" display switches itself on when gripped in the hand and off when released to conserve battery life

    Alternatively the display can be switched on and left on

    The probe and display are more comfortable to use than a conventional direct view microscope (avoids squinting and provides larger image)

    It is also safer as there is no direct optical path between the system under test and the eye

    Includes battery charger and tips for 2.5mm (e.g. ST, FC/PC & SC/PC) and 1.25mm (LC & MU) ferrule patch cords and LC and SC patch panels

    The FBP-SM05-UK version includes a patch cord inspection port in the display for faster inspection. This allows patch panels to be inspected using the probe and patch cords to be plugged into the display to avoid having to swap probe tips

    A switch simply toggles the display between the patch cord port and microscope probe inputs

    View details
  • £1,942.44
    LEAD TIME REQUIRED
    Combined fibre optic visual inspection and test
    More...

    Combined fibre optic visual inspection and test kit

    The kit consists of an FBP-P5 microscope probe for patch panel inspection and HP3-60-P4 LCD display that includes a patch cord inspection port and power meter

    The separate probe for patch panel inspection and port for patch cord inspection saves having to swap tips and speeds up system inspection time

    A switch simply toggles the display between the patch cord port and patch panel probe inputs

    The integral power meter allows optical power level readings to be taken and when used with a JDSU TwinTest light source can test two wavelengths simultaneously and automatically identify the wavelength

    The probe and 1.8" display are more comfortable to use than a conventional direct view microscope (avoids squinting and provides larger image)

    It is also safer as there is no direct optical path between the system under test and the eye

    Powered by 6 Alkaline AA cells or an AC adaptor (not charger)

    The microscope probe accepts the FBPT series tips. The patch cord port accepts the FMAE series adaptors

    Includes tips for 2.5mm (e.g. ST, FC/PC & SC/PC) and 1.25mm (LC & MU) ferrule patch cords and LC and SC patch panels

    Also available as a cleaning, test and inspection kit (includes cleaning products)

    The PRO kit includes a hands-free carrying holster that allows the user to view the display hands-free. The holster has cavities for the probe and cleaning products when not in use. This kit also includes cleaning products and a visible laser

    View details
  • £2,219.93
    LEAD TIME REQUIRED
    The OLP-82 combines the automated visual
    More...

    The OLP-82 combines the automated visual inspection capabilities of the HD4i display and FBP-P5000i probe with a power meter allowing a loss reading to be taken after inspection

    Kits are also available with cleaning products to provide a complete cleaning, inspection and test tool

    The integral power meter allows optical power level readings to be taken and when used with a JDSU TwinTest light source can test two wavelengths simultaneously and automatically identify the wavelength

    OLP-82/OLP-82P displays are also available with a high-power meter upon request

    The OLP-82 display is supplied with an FBP-P5000i probe. The OLP-82P version also includes a port in the display for patch cord inspection

    PRO versions are available that are powered by rechargeable Li-Ion battery instead of alkaline cells

    The PRO kit includes a hands-free carrying holster that allows the user to view the display hands-free. The holster has cavities for the probe and cleaning products when not in use. This kit also includes cleaning products and a visible laser

    The OLP-82/OLP-82P display is also available separately for customers who have an FBP-P5000i/FBP-SD101 probe. Please note that the display is not compatible with the FBP-P5000, FBP-SD01 or earlier analogue probes

    View details