Ortronics Mighty Mo
  • £85.26
    LEAD TIME REQUIRED
    An equipment shelf with four mounting points.
    More...

    An equipment shelf with four mounting points. Adjustable to suit all depths of rack

    100lb capacity. 19" mounting. Occupies 1U rack space. Black

    View details
  • £130.76
    LEAD TIME REQUIRED
    The Air Guard brush cable floor grommets provide
    More...

    The Air Guard brush cable floor grommets provide an effective seal around cables to help prevent cool air loss and underfloor dust contamination

    View details
  • £20.11
    LEAD TIME REQUIRED
    19" blanking panels available in flat, angled or
    More...

    19" blanking panels available in flat, angled or curved designs

    Black aluminium. Low cost plastic snap fit panels also available

    View details
  • £124.49
    LEAD TIME REQUIRED
    A two part shelf designed for supporting
    More...

    A two part shelf designed for supporting equipment on 6.5" deep Mighty Mo 6 racks. 150lb capacity

    19" mounting. Occupies 3U rack space. Black

    View details
  • £14.90
    IN STOCK
    Grounding lug for 2.5mm2 to 16mm2 conductors
    More...

    Grounding lug for 2.5mm2 to 16mm2 conductors

    View details
  • £597.40
    LEAD TIME REQUIRED
    Select the cage to suit the height of the rack (45
    More...

    Select the cage to suit the height of the rack (45U or 51U) and the width of cage required (12" or 16")

    The cabling is concealed by a stylish hinged door that provides easy access to cables for moves, adds, and changes

    12 bend limiting clips and 4 cable spools are supplied with the cage. More can be ordered separately if required

    Cable spools can be fitted to the middle of the cage to help support and route cables

    The cable guiding fingers of the cage coincide conveniently with the U height positions of the rack. Snap on bend limiting clips can be fitted to the fingers to provide a controlled and relaxed bend radius for fibre optic patch cords

    The vertical cable management cage is mounted on to the sides of the Mighty Mo 10 rack to provide neat and efficient management of patch cords around and between racks

    Mighty Mo 10 cages can also be used with Mighty Mo 6 racks

    View details
  • £1,070.77
    LEAD TIME REQUIRED
    The Mighty Mo 10 rack is designed to maximise the
    More...

    The Mighty Mo 10 rack is designed to maximise the airflow for network equipment

    The rack has large honeycomb shaped holes in the side panels to allow maximum airflow for side venting equipment

    Optional angled baffles that fit on to the sides of the rack are available that guide air intake at one side of the rack from the cold aisle and exhaust at the other side of the rack into the hot aisle

    Optional vertical management cages can be fitted to the sides of the rack to provide neat and efficient routing of patch cords around and between racks

    The roof includes two round bars for guiding cables down into the rack. The rear roof bar has holes suitable for attaching cable tray products

    The rack includes a waterfall cable guide at the front of the roof and base flanges that can be fitted outwards for extra stability or inwards to fit on a 600 x 600mm floor tile

    Cage nuts are not required as the 19" mounting posts are pre-drilled with 12-24 thread holes

    The lightweight aluminium frame is supplied flat packed but can be assemblied in as little as 7 minutes

    The Mighty Mo 10 is available in 45U and 51U height options. Capacity 1500lb. Colour black

    View details
  • £1,322.69
    LEAD TIME REQUIRED
    The Mighty Mo 10 Server rack can be used to
    More...

    The Mighty Mo 10 Server rack can be used to accommodate servers alongside Mighty Mo 10 and Mighty Mo 6 equipment and cable management racks

    The 19" mounting rails can be adjusted from 12.5" to 30" and are independent of the frame so they can be adjusted after the rack is installed

    For side venting network equipment optional angled baffles that fit on to the open sides of the rack are available that guide air intake at one side of the rack from the cold aisle and exhaust at the other side of the rack into the hot aisle

    The server rack uses the Mighty Mo 10 airflow baffles (requires server rack baffle rail)

    Optional vertical management cages can be fitted to the sides of the rack at the front or rear to provide neat and efficient routing of patch cords around and between racks

    The roof includes two round bars for guiding cables down into the rack. The rear roof bar has holes suitable for attaching cable tray products

    The rack includes a waterfall cable guide at the front of the roof and base flange for anchoring to the floor

    Cage nuts are not required as the 19" mounting posts are pre-drilled with 12-24 thread holes (pack of 50 screws included)

    The lightweight aluminium frame is supplied flat packed but can be assemblied in minutes

    The Mighty Mo 10 Server rack is available in 45U or 51U height. Capacity 1500lb evenly distributed. Colour black

    View details
  • £487.20
    LEAD TIME REQUIRED
    Select the cage to suit the height of the rack (45
    More...

    Select the cage to suit the height of the rack (45U or 51U) and the width of cage required (6" or 10")

    The cabling is concealed by a stylish hinged door that provides easy access to cables for moves, adds, and changes

    12 bend limiting clips and 4 cable spools are supplied with the cage. More can be ordered separately if required

    Cable spools can be fitted to the middle of the cage to help support and route cables

    The cable guiding fingers of the cage coincide conveniently with the U height positions of the rack. Snap on bend limiting clips can be fitted to the fingers to provide a controlled and relaxed bend radius for fibre optic patch cords

    The vertical cable management cage is mounted on to the sides of the Mighty Mo 6 rack to provide neat and efficient management of patch cords around and between racks

    Mighty Mo 6 cages can be used with Mighty Mo 10 racks provided a baffle kit is not required. If a baffle kit is fitted only Mighty Mo 10 cages can be used with Mighty Mo 10 racks

    Vertical management cages are also available with hinged covers or latches instead of doors. Please contact the sales department for details

    View details
  • £590.26
    LEAD TIME REQUIRED
    The Mighty Mo 6 cable management rack is
    More...

    The Mighty Mo 6 cable management rack is available in 3 depths. 6.5" and 10.5" for general cable management and patching or 16.25" for large and heavy front/back venting network equipment

    The Mighty Mo 10 rack should be used for side venting equipment

    Optional vertical management cages can be fitted to the sides of the rack to provide neat and efficient routing of patch cords around and between racks

    The roof includes two round bars for guiding cables down into the rack. The rear roof bar has holes suitable for attaching cable tray products

    The rack includes a waterfall cable guide at the front of the roof and base flanges for fixing to the floor. On the 16.25" version the base flange can be fitted outwards for extra stability or inwards to fit on a 600 x 600mm floor tile

    Cage nuts are not required as the 19" mounting posts are pre-drilled with 12-24 thread holes

    The lightweight aluminium frame is supplied flat packed but can be assemblied in as little as 7 minutes

    The Mighty Mo 6 is available in 45U and 51U height options. Colour black

    View details
  • £48.57
    LEAD TIME REQUIRED
    Provides a mounting location for 6-18"
    More...

    Provides a mounting location for 6-18" containment on top of Mighty Mo 6 or Mighty Mo 10 racks

    View details
  • £60.49
    IN STOCK
    A horizontal management panel designed to
    More...

    A horizontal management panel designed to organise patch cords horizontally and vertically on Mighty Mo racks

    The finger design encourages defined and traceable routing of patch cords

    Occupies 1U or 2U of rack space. 4U versions are also available upon request

    View details
  • £225.81
    IN STOCK
    End panels are used for finishing the end of a
    More...

    End panels are used for finishing the end of a row of Mighty Mo racks

    Standard end panels (OR-MM6EPxxx) are for smaller width VMD cages (6")

    Narrow end panels (OR-MM6EPNxxx & OR-MM10EPNxxx) are for use with wider VMD cages (10",12" & 16")

    Narrow end panels require a support bracket kit

    It is important that the correct end panel is selected

    Select the end panel to suit the height and depth of the rack and the width of vertical cable manager fitted

    View details
  • £16.26
    IN STOCK
    Mighty Mo 19" equipment mounting uprights have
    More...

    Mighty Mo 19" equipment mounting uprights have tapped holes and do not require cage nuts. The tapped holes are 12-24 thread (not M6 as commonly used). Suitable screws are available in packs of 50

    View details
  • £43.69
    LEAD TIME REQUIRED
    More...
    View details
  • £50.03
    LEAD TIME REQUIRED
    More...
    View details
  • £158.71
    LEAD TIME REQUIRED
    A high capacity (200lb) shelf designed for use
    More...

    A high capacity (200lb) shelf designed for use with Mighty Mo Server Racks

    The shelf mounts on the 19" mounting posts (rear shelf mounting can be adjusted to suit depth of 19" posts) and occupies 1U of rack space

    View details