Ideal
  • £115.00
    LEAD TIME REQUIRED
    The VDVII tester provides a lower cost tester for
    More...

    The VDVII tester provides a lower cost tester for checking the wiring integrity of CAT5e/6/6A twisted pair installations to T568A/B (RJ45 port)

    Checks structured cabling for wiremap, opens, shorts, miswires, and split pairs

    Includes an RJ11/RJ12 port for voice cable testing

    F type connector interface for checking coaxial cables for opens and shorts

    Easy to read LCD display with PASS or FAIL indication

    Tone generator function for cable tracing and fault finding (using an optional tone probe)

    The VDVII includes one remote that is placed at the far end of the system under test. The remote is stowed in the base of the instrument when not in use

    A pack of 12 numbered RJ45 wiremap remotes can be purchased separately to speed up testing by reducing the toing and froing (i.e. allows you to place 12 remotes in outlets and then perform 12 tests consecutively at the panel)

    The instrument recognises the remotes and displays the number of the remote it is connected to on the LCD to aid cable identification

    A pack of 24 ID-only RJ45 remotes is also available to help identify cable runs during system audits/cable tracing. These ID remotes cannot be used for wiremap checking

    A pack of 12 ID-only F type coax remotes are available for identifying satellite coax runs

    Supplied with one RJ45 wiremap remote, an F-coax ID remote and 9V alkaline battery

    View details
  • £210.00
    LEAD TIME REQUIRED
    The VDVII Plus tester checks the wiring integrity
    More...

    The VDVII Plus tester checks the wiring integrity and length of CAT5e/6/6A twisted pair installations to T568A/B (RJ45 port)

    Checks structured cabling for wiremap, opens, shorts, miswires, split pairs and length

    Includes an RJ11/RJ12 port for voice cable testing

    F type connector interface for checking coaxial cables for opens, shorts and length

    Easy to read LCD display with PASS or FAIL indication

    Tone generator function for cable tracing and fault finding (using an optional tone probe)

    A hub blink function provides a basic Ethernet connection test

    The VDVII Plus includes one remote that is placed at the far end of the system under test. The remote is stowed in the base of the instrument when not in use

    A pack of 12 numbered RJ45 wiremap remotes can be purchased separately to speed up testing by reducing the toing and froing (i.e. allows you to place 12 remotes in outlets and then perform 12 tests consecutively at the panel)

    The instrument recognises the remotes and displays the number of the remote it is connected to on the LCD to aid cable identification

    A pack of 24 ID-only RJ45 remotes is also available to help identify cable runs during system audits/cable tracing. These ID remotes cannot be used for wiremap checking

    A pack of 12 ID-only F type coax remotes are available for identifying satellite coax runs

    Supplied with one RJ45 wiremap remote, an F-coax ID remote, F-BNC adaptors, F-RCA adaptors RJ45-croc clip cables, 9V alkaline battery and case

    View details
  • £327.00
    LEAD TIME REQUIRED
    The VDVII Pro tester combines wiring integrity
    More...

    The VDVII Pro tester combines wiring integrity and length checking of CAT5e/6/6A twisted pair installations (RJ45 port) with service identification features

    Detects the speed and duplex information of an Ethernet port (10/100/1000Base-T). Detects PoE and displays voltage. Detects PBX and ISDN telephone circuits

    A hub blink function provides a basic Ethernet connection test

    Checks structured cabling for wiremap, opens, shorts, miswires, split pairs and length

    Includes an RJ11/RJ12 port for voice cable testing

    F type connector interface for checking coaxial cables for opens, shorts and length

    Easy to read LCD display with PASS or FAIL indication

    Tone generator function for cable tracing and fault finding (using an optional tone probe)

    The VDVII Pro includes one remote that is placed at the far end of the system under test. The remote is stowed in the base of the instrument when not in use

    A pack of 12 numbered RJ45 wiremap remotes can be purchased separately to speed up testing by reducing the toing and froing (i.e. allows you to place 12 remotes in outlets and then perform 12 tests consecutively at the panel)

    The instrument recognises the remotes and displays the number of the remote it is connected to on the LCD to aid cable identification

    A pack of 24 ID-only RJ45 remotes is also available to help identify cable runs during system audits/cable tracing. These ID remotes cannot be used for wiremap checking

    A pack of 12 ID-only F type coax remotes are available for identifying satellite coax runs

    Supplied with one RJ45 wiremap remote, an F-coax ID remote, F-BNC adaptors, F-RCA adaptors RJ45-croc clip cables, 9V alkaline battery and case

    View details
  • £1,432.00
    LEAD TIME REQUIRED
    The FiberMASTER is a very compact power meter and
    More...

    The FiberMASTER is a very compact power meter and quad wavelength light source fibre loss testing kit

    The light source has two ports: one for 850 & 1300nm multimode and the other for 1310 & 1550nm singlemode

    It includes interchangeable SC, FC and ST adaptors

    The power meter has an LCD that displays absolute power in dBm or mW and can be "zero'd" for relative loss measurements in dB

    It has a wavelength selection button for 850, 1300, 1310, 1490 and 1550nm

    The power meter includes a fixed FC interface. This cannot be changed.

    When not in use the light source is conveniently stored in a 'docking station' at the base of the power meter

    Each unit is powered by 3 x AAA alkaline batteries

    View details
  • £102.00
    IN STOCK
    Used for identifying and tracing wires within a
    More...

    Used for identifying and tracing wires within a group without damaging insulation

    Tone generator applies a tone (choice of three) to a single wire or pair

    Amplifier probe is then used to trace the audible tone and identify the wire

    Amplifier probe has volume control

    Suitable for twisted pair cables, coax, and AC wiring (de-energized)

    Both instruments are powered by 9v PP3 batteries (included)

    Kit includes probe, tone generator, RJ45 lead, alligator clip lead, flat probe tip and a soft carry case

    View details
  • £182.00
    LEAD TIME REQUIRED
    The VFF5 is a visible (650nm) laser source used
    More...

    The VFF5 is a visible (650nm) laser source used for identifying broken fibres in patch cords, pigtails and splice trays

    Broken fibres will be illuminated by escaping red glowing light

    The light source can also be used for correctly identifying fibres in patch panels. Switching from continuous wave to flashing (1Hz) light can assist in locating fibres in congested panels

    The VFF5 has a universal 2.5mm interface to accept SC, FC and ST connectors

    It is suitable for both multimode (up to 3km) and singlemode (up to 4km) fibres

    The rugged Santoprene rubber covered body is ideal for field use and the no-roll design prevents it rolling off your bench

    Includes 2 x AA alkaline batteries and a soft nylon case

    View details
  • £106.00
    LEAD TIME REQUIRED
    A digital light meter that simply and accurately
    More...

    A digital light meter that simply and accurately measures light levels from fluorescent, metal halide, high pressure sodium and incandescent lighting when performing safety and energy efficiency audits in buildings and data centres

    Four ranges up to 20,000FC or 200,000 Lux. ±3% accuracy

    View details
  • £117.00
    LEAD TIME REQUIRED
    A professional grade full featured multimeter
    More...

    A professional grade full featured multimeter with a back-lit display

    Measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency and temperature (includes a thermocouple probe)

    Includes audible continuity check, data hold, low battery indicator, and auto power off functions

    CAT III 1000V, CAT IV 600V

    A true RMS version is available

    2 year manufacturer warranty

    View details
  • £267.00
    LEAD TIME REQUIRED
    The TightSight clamp meter measures current
    More...

    The TightSight clamp meter measures current without breaking the electrical circuit but also features full multimeter functions such as voltmeter and measurement of resistance, capacitance and frequency

    The tapered jaws are ideal for tight locations and the revolutionary TightSight second display at the base of the handle allows the user to see measurements in tight, hard-to-reach spaces and keep his head and face out of potentially dangerous panels

    1000A AC/DC (with true RMS) current capacity. CAT IV 600V and CATIII 1000V rating

    Includes a carrying case and test leads with crocodile clips

    View details
  • £62.50
    LEAD TIME REQUIRED
    A voltage and continuity checker that gives an
    More...

    A voltage and continuity checker that gives an indication of voltage level via a series of LEDs

    Tests AC voltage from 24-600VAC and DC voltage from 6-220VDC

    Non-contact voltage check (40-600VAC) and audible continuity checker functions

    Integral test lead storage

    CAT III 1000V

    2 year warranty

    View details
  • £20.50
    LEAD TIME REQUIRED
    A non-contact voltage checker that quickly
    More...

    A non-contact voltage checker that quickly identifies live conductors and terminals, breaks in wires and the presence of AC voltage

    A green LED indicates that the power is on

    The pen-style tester gives a visual and selectable audible indication of voltage

    CAT IV 600V, CAT III 1000V

    2 year warranty

    View details
  • £34.75
    IN STOCK
    Crimp tool with interchangeable dies for RJxx
    More...

    Crimp tool with interchangeable dies for RJxx style modular plugs

    Ratchet mechanism prevents jaws from opening before crimp is complete, ensuring consistent and repeatable crimps

    Crimp release trigger for operator safety

    Cushion grip handles reduce operator fatigue

    Purchase a crimp tool handle and dies separately

    View details
  • £32.50
    IN STOCK
    Cleaves the sprig of fibre during connector
    More...

    Cleaves the sprig of fibre during connector termination

    Using scribe nick the fibre as close to the ferrule as possible and gently pull on the fibre

    Cleave will propagate across the fibre

    Ruby, sapphire, and carbide bladed versions available. Blades are reversible providing double the tool life

    Pen style design (lid protects blade when not in use)

    Non-slip handle for precise control during cleaving

    View details
  • £36.00
    LEAD TIME REQUIRED
    Designed for pulling cables into conduits,
    More...

    Designed for pulling cables into conduits, trunking and ducts over short distances

    Available with blued steel or non-conductive fibreglass tapes

    Tapes incorporate cable attachment eyelets. Steel tapes are laser etched every 12" to help determine conduit length

    Large ergonomic handle

    Available in a choice of lengths

    View details
  • £6.50
    LEAD TIME REQUIRED
    Aqua-Gel II lubricant for use during cable
    More...

    Aqua-Gel II lubricant for use during cable pulling operations. Provides maximum tension reduction in high-stress electrical and communications cable pulling operations

    Can be applied by hand, brush or pump

    Compatible with all types of cables except composite rubber

    Clings to cables throughout long pulls

    Dries to a semi-fluid that doesn't clog conduits

    Cleans up easily with soap and water

    Usable from -2°C to 82°C (cold weather version also available for temperatures down to -32°C)

    Environmentally safe, non-toxic, non-flammable, non-corrosive

    Available in 1Qt squeeze bottle or 5US gallon buckets

    View details
  • £7.75
    LEAD TIME REQUIRED
    ClearGlide lubricant for use during cable pulling
    More...

    ClearGlide lubricant for use during cable pulling operations. Ideal for indoor installation of electrical and data cables

    Compatible with all types of cables

    Can be applied by hand, brush or pump

    Dries to a semi-fluid that doesn't clog conduits

    Usable from -1°C to 82°C

    Environmentally safe, non-toxic, non-flammable, non-corrosive

    Available in 1Qt squeeze bottle, 1US gallon bucket or 5US gallon buckets

    View details
  • £6.30
    IN STOCK
    The number one brand of lubricant for use during
    More...

    The number one brand of lubricant for use during cable pulling operations since 1959

    Can be applied by hand or brush

    Compatible with all types of cables except low-density polyethylene

    Clings to cables throughout long pulls even where moisture is present

    Dries to a thin non-conductive film

    Environmentally safe, non-toxic, non-flammable, non-corrosive

    Available in 1Qt squeeze bottle, 1US gallon bucket or 5US gallon buckets

    View details
  • £58.50
    LEAD TIME REQUIRED
    Provides all the ease of use and reliability of
    More...

    Provides all the ease of use and reliability of the Tuff-Grip fish tape with the added assurance that it is non-conductive up to 1000V when installing cables alongside live circuits

    View details
  • £15.50
    IN STOCK
    Cuts round copper multi-pair cables up to 0.5"
    More...

    Cuts round copper multi-pair cables up to 0.5" diameter

    Bolt cutter for steel central strength members

    Cushioned handles

    Latch keeps blade closed when not in use

    View details
  • £18.00
    IN STOCK
    Range of stripping tools to suit cables up to 14.3
    More...

    Range of stripping tools to suit cables up to 14.3mm diameter

    Blades for radial and longitudinal cuts

    Adjustable blade depth to suit jacket thickness

    Each tool supplied with three straight and one round blade

    View details
  • £12.25
    IN STOCK
    Range of tools for stripping tight jacket cables
    More...

    Range of tools for stripping tight jacket cables up to 3.8mm and cutting loose tubes up to 5mm

    Precision ground corrosion resistant blades

    View details
  • £26.50
    LEAD TIME REQUIRED
    A lower cost version of the Lite Strip optical
    More...

    A lower cost version of the Lite Strip optical fibre buffer/jacket stripper

    Small notch for stripping 900um buffer and 250um coating. Large notch for stripping patch cable jacket

    View details
  • £43.00
    IN STOCK
    Punch down tool to insert and cut wires in 110
    More...

    Punch down tool to insert and cut wires in 110 IDC blocks

    Replacement tips are available. Tips are also available for '66', Krone, and Nortel Bix style connection blocks

    View details
  • £39.70
    IN STOCK
    Multi-function tool cuts, strips, and
    More...

    Multi-function tool cuts, strips, and crimps

    Crimps RJ-45 (4 pair) and RJ-11 (1,2,3 pair) plugs

    Spare cut and strip blade set available

    View details